Your truck requires plenty of clean fuel to run. When your fuel isn’t clean, your fuel injectors can start to become clogged up. When this happens, your truck engine may not get the proper amount of fuel at the correct pressure to run efficiently. This hurts fuel economy and performance as you drive around Bartlett. It can also lead to the buildup of harmful deposits on valves and in the combustion chamber.
That’s why all vehicles, including trucks, come equipped with a fuel filter somewhere between the engine and the fuel tank. The job of the filter is to clean out little pieces of dirt and contamination. The filter captures the contaminants and holds them out of the fuel stream. Of course, the filter will eventually get clogged up and need to be replaced at Rx Automotive.
If your fuel filter is clogged, the truck engine can’t get all the fuel it needs, and it may sputter at high speeds or quick acceleration. Many fuel filters have a bypass valve that will allow unfiltered fuel through when they are clogged. This keeps your engine running, but doesn’t protect it from contaminated fuel.
You may find that you need to change your fuel filter at Rx Automotive more frequently as your truck ages. Over the years, additional sediment and rust accumulates in the fuel tank and can be drawn into the fuel system. Your fuel filter stands guard at the gates to your engine to protect expensive parts and to maintain performance and fuel economy.
It seems like everywhere you go in the Bartlett area you see custom wheels. Big trucks, little cars, mini-vans – it doesn’t matter, people are expressing themselves with custom wheels. Some people want smaller tires and wheels – some want larger – and some want them enormous. So where do you start if you want new wheels? We suggest you start with your budget. We know, that sounds so practical. But if the look you’re after goes beyond just new tires and wheels and enters into the world of suspension modifications, you need to be prepared for the additional cost.
Let’s start with something easy – you want to give your ride a unique look and the stock wheel size is just right for you. One of the concerns you will have is that the new wheels have the same offset as your factory wheels.
First, what is offset? The wheel bolts onto the hub on the car’s axle. The distance from the inside edge of the wheel to the point at which it bolts on, is the offset. If the new wheel has a different offset from the factory, the tires may rub on the inside or outside of the wheel well. That could lead to catastrophic tire failure.
Your tire and wheel professional at Rx Automotive can help you find the right size wheel – or install adapters to make your new wheels fit. All you have to do is pick from the hundreds of styles available.
602 Sidwell Ct Unit H
Saint Charles, IL 60174
So, what if you want to upsize? Well, if it is just bigger wheels you want, but you want to keep the same overall tire diameter, that’s pretty easy. The same offset concerns apply. You need to know that the tires will likely be a little bit wider than the originals and could rub when you make sharp turns. Your tire professional at Rx Automotive will help you avoid this.
It is also important to keep the same overall tire diameter because changing the rolling diameter can mess with your anti-lock brakes and stability control systems. Are you starting to see why you want to consult with a tire and wheel expert at Rx Automotive? Is “super-size me” your motto? If it is, you are going to have to lift your vehicle to make room for those huge tires. A mild lift doesn’t require extensive modifications. An extreme lift means a lot of new hardware under the vehicle. It also means a lot of stock electronic systems need to be recalibrated to the new tire size. For example, your speedometer and odometer will give false readings if they aren’t recalibrated.
You should also be aware of possible performance issues. Bigger tires and wheels weigh more. Experts refer to this as unsprung weight because it isn’t held up by your suspension system. Increased unsprung weight affects performance in different ways than an equivalent amount of groceries or little soccer players in the passenger compartment. Acceleration is negatively affected. Stopping distances may also be increased – sometimes dramatically. If you want really big tires and wheels, you might need to upgrade your brakes to compensate.
Heading the other direction, some folks like to run smaller than standard wheels and lower the suspension. All of the same fitment issues still apply as well as calibration issues. Don’t think that suspension modifications are a bad thing. Many systems actually improve ride, function and performance over the stock set-up.
Regardless of your budget, you want your vehicle to continue to do all the things you need it to do. Some of those show cars and trucks you see on TV look fantastic, but have been modified in ways that may not suit your needs. For example, if you put large rims on your SUV with low profile tires, you may be in for busted rims if you go off-roading a lot. There just isn’t enough sidewall to absorb the impact of thumping over rocks.
Some people stuff the largest tires and wheels possible in their vehicles but have to severely restrict suspension travel so that the tires aren’t rubbing all day. That can lead to a very harsh ride. Again, talk with your wheel professional about all of these things: how you drive, what look you are going for, your budget and what compromises you are willing to make.
At the end of the day, you’re going to be rollin’ out of there with one sweet ride.
So what is the most distracting food to have in the car while driving around Saint Charles?
- A Hamburger;
- A Soft Drink, or
- Gummy Bears?
Well, you may be surprised to learn that all but the gummy bears are in the top ten most distracting foods when you are driving, but if you chose ‘coffee’, then give yourself an extra two points; coffee is the number one food distraction for drivers in Saint Charles and around the country.
Food distractions cause 25 percent of all car accidents; over a million and a half each year!
You’ll notice that all of the top ten distracting food items are messy. Messy foods are the type of food you might spill (very distracting!), then try to clean up (a safe-driving impossibility!). If you gotta eat on the run, take five-then drive. You’ll thank yourself later for two reasons, one being that you can actually relax for just a moment in our fast-paced world, and the other is that you won’t have to worry about getting that cinnamon roll frosting out of your dashboard after that near miss.
Keep drinks in spill-proof containers, too, so you can keep your eyes on the Saint Charles road without worrying about where that spill is headed.
So; taking a food break… Or filling out accident reports. We don’t have to ask you which you prefer: It’s a no brainer.
Rx Automotive, along with AutoNetTV, wants you to keep both eyes on the road. Please eat safely and keep your eyes on the road.
602 Sidwell Ct Unit H
Saint Charles, IL 60174
Give us a call at: 630-443-8500
So, when are your tires actually worn out? This is a question a lot of us in Saint Charles IL ask ourselves. For many, the answer is ‘when they no longer pass a safety inspection’. But waiting that long can have a serious impact on your safety.
The U.S. Federal government doesn’t have any laws for tread depth, but 42 of the states, and all of Canada, do have regulations. They consider two-thirty-seconds of an inch to be the minimum legal tread depth. Two other states, including California, consider one-thirty-second to be the minimum and six states have no standards at all. Call us at Rx Automotive (just call 630-443-8500) to find out what your requirements are in the Saint Charles IL area.
Since 1968, U.S. law has required that a raised bar be molded across all tires. When tires are worn enough that this bar becomes visible, there’s just 2/32” of tread left. But does that older standard give you enough safety?
Well, Consumer Reports issued a call to consider replacing tires when tread reaches 4/32”. And the recommendation is backed by some very compelling studies. Now before we go into the studies, you need to know that the big issue is braking on wet surfaces.
We tend to think of the brakes doing all the stopping, but you also need to have effective tires to actually stop the car. When it’s wet or snowy in Saint Charles IL, the tread of the tire is critical to stopping power.
Picture this: you’re driving over a water-covered stretch of road. Your tires actually need to be in contact with the road in order to stop. That means the tire has to channel the water away so the tire is actually contacting the road and not floating on a thin film of water – a condition known as hydroplaning. When there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.
This is where the studies come in. We think you’ll be surprised. A section of a test track was flooded with a thin layer of water. If you laid a dime flat on the track, the water would be deep enough to surround the coin, but not enough to cover it.
A car and a full-sized pick-up truck were brought up to 70 mph and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths. First, they tested new tires. Then tires worn to legal limits. And finally, tires with 4/32” of tread were tested – this is the depth suggested by Consumer Reports
When the car with the legally worn tires had braked for the distance required to stop the car with new tires, it was still going 55 mph. The stopping distance was nearly doubled. That means if you barely have room to stop with new tires, then you would hit the car in front of you at 55 mph with the worn tires.
Now with the partially worn tires – at the depth recommended by Consumer Reports – the car was still going at 45 mph at the point where new tires brought the car to a halt. That’s a big improvement – you can see why Consumer Reports and others are calling for a new standard.
Now without going into all the details, let us tell you that stopping the truck with worn tires needed almost 1/10 of a mile of clear road ahead to come to a safe stop. Obviously this is really a big safety issue.
The tests were conducted with the same vehicles, but with different sets of tires. The brakes were the same, so the only variable, was the tires.
So, how do you know when your tires are at 4/32”? Well, it’s pretty easy. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.
Now you may remember doing that with pennies. But a penny gives you 2/32” of an inch to Abraham Lincoln’s head. The quarter is the new standard – 4/32”.
Tires are a big ticket item and most people in Saint Charles IL want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out? For us, and we would guess for many, the answer is “no”.
Well, Mr. Washington, let’s go out and look at my tires.
602 Sidwell Ct Unit H
Saint Charles, IL 60174
Today we’re talking about shocks and struts. They’re so easy to forget about because they last so long and wear out so slowly. But your shocks are really responsible for keeping your tires on the road – so they’re very important.
Without shocks, your wheels would be bouncing over bumps and lifting in corners. The shocks push the tire down to the road to maximize traction. Good shocks equal good ride quality and safe handling.
Visit Rx Automotive to have your shocks and struts inspected by a professional. You can find us at 602 Sidwell Ct Unit H , Saint Charles, IL 60174
Or give us a call at 630-443-8500 to make an appointment.
There’s a difference between shocks and springs. Springs support the weight of the vehicle, keeping it suspended up off the axles. The shocks moderate the rebound motion as wheels hit bumps. Now a strut combines a shock and a coil spring in one compact unit.
When your shocks are worn out you may notice degraded handling as you drive around our Saint Charles streets. Your vehicle feels squirmy around corners and floaty over bumps.
You may notice the rear end squatting when you accelerate or the front end diving when you brake. Your car might even be sagging at one corner.
Uneven tire wear can also be a sign of worn shocks. Of course, if your shocks are leaking or have a big dent, they need to be replaced.
Your owner’s manual will have a recommendation for when to replace the shocks and struts on your vehicle. It’s usually between thirty and fifty thousand miles. Of course, if you tow a lot, regularly carry heavy loads or do a lot of driving on poor roads, your shocks might wear out faster.
If those driving conditions apply to you, you can get special shocks that are better suited to your driving.
The shocks that come from the factory are designed for the way most consumers are expected to drive that particular vehicle. If you have different needs for your driving around Saint Charles IL, you can get premium shocks that improve performance handling, off-road abilities or towing comfort. Your Saint Charles IL service consultant at Rx Automotive can help you determine your needs and then give you some options.
It’s best to replace all four shocks at the same time. That way you’ll have even, predictable handling at all four corners. Anything less could be dangerous.